TYPICAL SPECIFICATIONS
Output Current……………………..……25 Amps ICAS 30A peak.
Output Voltage …………………………13.8 Volts at 9.5-13.8 volts input.
Before attempting to operate your MFJ-4418, please read the manual thoroughly. It contains
important details about setting up your unit to obtain the best performance.
EASY START INSTRUCTIONS
1.
Prepare input and the output cables for the MFJ-4418. It is recommended to use #12 or
larger wire for both the input and output cables. MFJ has cables available for the output
side for use with most HF and VHF/UHF radios.
2.
Prior to connecting the radio and battery, plug the input and the output cables in to the
MFJ-4418 and ensure the polarity is correct.
3.
Plug the output of the MFJ-4418 into your radio and then attach the input to your battery.
4.
You are now ready to operate. If not using external switching, depress the enable switch.
NOTE: The MFJ-4418 is not designed to boost the voltage of a 6V
electrical system up to 13V and will not run on a positive ground
system. It will also not reduce the voltage of a 24 volt system to 13V.
Summary of Contents for MFJ-4418
Page 1: ......
Page 17: ...Schematics Figure 11 SMPS Section Schematic...
Page 18: ...Figure 12 Control Section Schematic...
Page 19: ...Figure 13 CPU Section...
