background image

12 MONTH LIMITED WARRANTY 

 

MFJ Enterprises, Inc. Warrants to the original  owner of this product, if manufactured by MFJ 
Enterprises, Inc. and purchased from an authorized dealer or directly from MFJ Enterprises, Inc. to be 
free from defects in material and workmanship for a period of 12 months from date of purchase 
provided the following terms of this warranty are satisfied. 
 
1.

 

The purchaser must retain the dated proof-of-purchase (bill of sale, canceled check, credit card or 
money order receipt, etc.) describing the product to establish the validity of the warranty claim 
and submit the original or machine reproduction of such proof-of-purchase to MFJ Enterprises, 
Inc. at the time of warranty service.  MFJ Enterprises, Inc. shall have the discretion to deny 
warranty without dated proof-of-purchase.  Any evidence of alteration, erasure, or forgery shall be 
cause to void any and all warranty terms immediately. 

 
2.

 

MFJ Enterprises, Inc. agrees to repair or replace at MFJ’s option without charge to the original 
owner any defective product under warranty, provided the product is returned postage prepaid to 
MFJ Enterprises, Inc. with a personal check, cashiers check, or money order for $7.00 covering 
postage and handling. 

 
3.

 

MFJ Enterprises, Inc. will supply replacement parts free of charge for any MFJ product under 
warranty upon request.  A dated proof-of-purchase and a $5.00 personal check, cashiers check, or 
money order must be provided to cover postage and handling. 

 
4.

 

This warranty is NOT void for owners who attempt to repair defective units.  Technical 
consultation is available by calling (662) 323-5869. 

 
5.

 

This warranty does not apply to kits sold by or manufactured by MFJ Enterprises, Inc. 

 
6.

 

Wired and tested PC board products are covered by this warranty provided only the wired and 
tested PC board product is returned.  Wired and tested PC boards installed in the owner’s cabinet 
or connected to switches, jacks, or cables, etc. sent to MFJ Enterprises, Inc. will be returned at the 
owner’s expense unrepaired. 

 
7.

 

Under no circumstances is MFJ Enterprises, Inc. liable for consequential damages to person or 
property by the use of any MFJ products. 

 
8.

 

Out-of-warranty Service: MFJ Enterprises, Inc. will repair any out-of-warranty product provided 
the unit is shipped prepaid.  All repaired units will be shipped COD to the owner.  Repair charges 
will be added to the COD fee unless other arrangements are made. 

 
9.

 

This warranty is given in lieu of any other warranty expressed or implied. 

 
10.

 

MFJ Enterprises, Inc. reserves the right to make changes or improvements in design or 
manufacture without incurring any obligation to install such changes upon any of the products 
previously manufactured. 

 
11.

 

All MFJ products to be serviced in-warranty or out-of-warranty should be addressed to MFJ 
Enterprises, Inc., 300 Industrial Park Road, Starkville, Mississippi 39759, USA and must be 
accompanied by a letter describing the problem in detail along with a copy of your dated proof-of-
purchase. 

 
12.

 

This warranty gives you specific rights, and you may also have other rights, which vary from state 
to state. 

 

Summary of Contents for MFJ-1838

















Reviews: