background image

 

MFJ-498 Instruction Manual 

Full 12 Month Warranty 

 

MFJ Enterprises, Inc. warrants to the original owner of this product, if manufactured by MFJ 
Enterprises, Inc. and purchased from an authorized dealer or directly from MFJ Enterprises, 
Inc. to be free from defects in material and workmanship for a period of 12 months from date 
of purchase provided the following terms of this warranty are satisfied. 

 

1.

 

The purchaser must retain the dated proof-of-purchase (bill of sale, canceled check, credit 
card or money order receipt, etc.) describing the product to establish the validity of the 
warranty claim and submit the original of machine reproduction or such proof of purchase to 
MFJ Enterprises, Inc. at the time of warranty service.  MFJ Enterprises, Inc. shall have the 
discretion to deny warranty without dated proof-of-purchase.  Any evidence of alteration, 
erasure, of forgery shall be cause to void any and all warranty terms immediately. 

 

2.

 

MFJ Enterprises, Inc. agrees to repair or replace at MFJ's option without charge to the 
original owner any defective product provided the product is returned postage prepaid to MFJ 
Enterprises, Inc. with a personal check, cashiers check, or money order for 

$7.00 

covering 

postage and handling. 

 

3.

 

MFJ Enterprises, Inc. will supply replacement parts free of charge for any MFJ product under 
warranty upon request.  A dated proof of purchase and a

 $5.00

 personal check, cashiers 

check, or money order must be provided to cover postage and handling. 

 

4.

 

This warranty is 

NOT

 void for owners who attempt to repair defective units.  Technical 

consultation is available by calling (601) 323-5869. 

 

5.

 

This warranty does not apply to kits sold by or manufactured by MFJ Enterprises, Inc. 

 

6.

 

Wired and tested PC board products are covered by this warranty provided 

only the wired 

and tested PC board product is returned.

  Wired and tested PC boards installed in the 

owner's cabinet or connected to switches, jacks, or cables, etc. sent to MFJ Enterprises, Inc. 
will be returned at the owner's expense unrepaired. 

 

7.

  

Under no circumstances is MFJ Enterprises, Inc. liable for consequential damages to person 
or property by the use of any MFJ products. 

 

8.

 

Out-of-Warranty Service: 

MFJ Enterprises, Inc. will repair any out-of-warranty product 

provided the unit is shipped prepaid.  All repaired units will be shipped COD to the owner.  
Repair charges will be added to the COD fee unless other arrangements are made. 

 

9.

 

This warranty is given in lieu of any other warranty expressed or implied. 

 

10.

 

MFJ Enterprises, Inc. reserves the right to make changes or improvements in design or 

Summary of Contents for MFJ-498


























Reviews:

Related manuals for MFJ-498