MFJ-498 Instruction Manual
Random Code Generator
The random code generator is designed to teach the beginner the Morse alphabet.
Enter "
R
" in the command mode to start the code generator.
The random code generator can be configured in two ways. When "
C
" is "on", the
keyer sends fixed sets of characters and punctuation. Use the command mode and
"
1
"-"
9
" to choose a set. Refer to the table on page 13. When "
C
" is "off", the keyer
sends alphabetic, numeric, prosign, or punctuation characters. Use the command
mode and "
APNG
" to enable any or all character types to be sent. The keyer's
default is "
C
" "off", 5 character words with alphabetic type characters. To study a
group of individual characters, select "
C
" to choose a fixed character set and then
select a fixed group "
1
" through "
9
". The default set is "
1
" (A-F).
When you are setting your keyer up for code practice, remember to use "
F9
" "
Q
" to
see which commands are selected.
Note that when "
C
" is "off" and "
APNG
" are also all set to "off", the keyer is not able
to start the random code generator!
Summary of Contents for MFJ-498
Page 19: ...MFJ 498 Instruction Manual...
Page 23: ...MFJ 498 Instruction Manual...
