MFB Tanzbar 2, Operating Manual

Page: 16 / 28

16
LFOs
Press the LFO key to turn on an LFO track. The
parameters shown in the display shown, Rate and
Amount, can be adjusted using the encoders DATA1
and DATA2.
The waveform can be changed by using of the DATA3
key and the first eight white keys (see list
below).
The
DATA4 key selects the modulations target of
the LFO. In most cases, this is the tune
parameter.
Mute LFOs
Enter the Mute-LFO mode by pressing the LFO key
while holding down the shift-key. The LED above
the
LFO- key is now lit green. The respective LFOs
can now be muted using instrument keys.
Please note! Instruments with alternative tracks
such as Clap and Perc1 only have one LFO each.
Button Display Explanation
1 sawU Sawtooth Up
2 sawD Sawtooth Down
3 Puls Puls wave
4 sine Sine wave
5 sawUO Sawtooth Up One
Shot
6 sawDO Sawtooth Down
Oneshot
7 pulsO Puls wave One
shot
8 sineO Sine wave One
shot