Shuffle
The MFB-301 Pro offers five shuffle-intensities. With the sequencer being
stopped, press
Shuffle
followed by a button
1-6
. 1 stands for no shuffling. LEDs
1-6
visualize the selected pattern. This setting applies globally.
Hint
: MIDI-functions can only be adjusted with the sequencer being stopped.
MIDI Channel
Use the learn function to set the MIDI-channel. While the sequencer is being
stopped, press
MIDI
, followed by a note on your MIDI-keyboard. As soon as the
LED above the
MIDI-
button turns off, the procedure is completed.
MIDI Velocity
To enable the reception of velocity-data, press
MIDI
followed by button
1
.
Velocity is enabled with LED 1 being lit. It is inactive with LED 1 being turned
off.
MIDI CC
The unit can receive more than 20 MIDI-control commands (see MIDI
implementation list). Press
MIDI
and button
2
to either enable reception of
controllers (LED 2 lit) or not (LED 2 off).
MIDI Clock/External Sync
With the MFB-301 Pro’s sequencer set to internal (LEDs above buttons
3
and
4
turned off), an incoming MIDI-clock or an analog sync-signal will be ignored. To
activate an external synchronization, press
MIDI
and button
3
for MIDI-clock or
button
4
for an external analog clock (LED 3 respectively 4 lit).
The external sync jack is a TRS-jack where the tip receives the clock signal and
the ring receives start and stop commands.
Sound Changes via MIDI
Received MIDI controller data will permanently change the sound settings.
Should you wish to return to the last saved state, press
MIDI
followed by
5
.
Hint:
When using MIDI CCs to dynamically change sound parameters, it is
recommended to use the drum kit on MIDI-notes 36 to 47. Higher notes already
use MIDI CCs internally. See table MIDI implementation.
Saving Basic Settings
Sound-, MIDI- and shuffle-settings can be saved, making them available when
turning the unit back on. To do so, press MIDI
,
release the button and press
REC
.
