MFB MFB-301 Pro, Operating Manual

Page: 12 / 13

Transferring Patterns to the MFB-301 Pro
To transfer a single pattern to your MFB-301 Pro’s RAM, carry out the following steps:

Make sure, the MFB-301 Pro has successfully been connected to the computer via
USB and has been detected by HTerm.

Ideally, delete the current pattern by pressing Rec and Play on the MFB-301 Pro. This
way, you will be able to hear the difference after the transfer.

Click Send File in HTerm.

Locate the desired pattern file on your computer, e.g. PATT2_11.MFB.

Click Open in HTerm.

Press Bank 1 on the MFB-301 Pro.

Release the button.

Press Rec .

Release the button.

Press Play .

You now have approx. 30 seconds to initiate the transfer in HTerm by pressing Start .

Now, save the pattern in your MFB-301 Pro.
Hint: Only the data of a single pattern are being transferred.
4