MFB DOMINION 1, Operating Manual

Page: 18 / 35

18
Key Functions - Aftertouch
The keyboard's channel-
aftertouch function can
be used to add punctual
control
to different
parameters.
The bipolar
AT Mod control sets the amount of
modulation. When turned right from its center position,
the modulation is positive. When turned left from center,
the modulation is inverted. There is no aftertouch
modulation with this control in center position.
The modulation target is selected by
AT Select and the
program section. Press the AT Select button and the
corresponding LED will be lit red while the display
changes.
Use the
Value control to select a modulation target that
is enabled by pressing Enter . The display will now read
O O O Onnnn
while the AT Select LED will turn off. Available choices are
pitch, VCO-Modulation and the filter's cutoff frequency.
OAP OAP OAP OAP
– pitch of all three oscillators
O1P
O1P O1P
O1P
/
O2P
O2P O2P
O2P
/
O3P
O3P O3P
O3P
– pitch of oscillator 1, 2 or 3
OAA OAA OAA OAA
– common modulation of all three oscillators,
according to Mod Select and Modulation settings
O1A O1A O1A O1A
/
O2A O2A O2A O2A
/
O3A O3A O3A O3A
– modulation of oscillator 1, 2 or 3,
according to Mod Select and
Modulation settings
Note:
With all oscillators' Modulation controls being set to
null, this modulation is being virtually activated by using
aftertouch. Here, the modulation depth for
AT Mod is the
decisive factor. With any modulation depth being preset
for the oscillators, the
AT Mod modulation will be added.