15
LFOs
LFO1
and
LFO2
offer
equal functions. The
Rate
control sets the speed
within a range of approx.
0.1 Hz to 100 Hz.
Note:
Just as for the envelopes, the LFOs can be
switched to a slower mode (see page 25). Here, the
speed approx. ranges from 40 seconds to 25 Hz.
Use the six-stage selector
Wave
to choose the
modulation waveform. Available are sine, triangle,
descending saw tooth, ascending saw tooth, square as
well as sample & hold.
Press
Reset
to determine whether the LFO-waveform is
restarted by every incoming MIDI-note:
LED off – free running LFO
LED green – free running LFO (LED pulses in sync)
LED red/green – the LFO waveform cycle starts with each
incoming MIDI-note (LED changes color for each beat)
LED red – LFO works in one shot mode
Note:
In one shot mode, the selected waveform is only
being completed once for each note played. This mode
is indicated by a green LED that lights up upon triggering.
The
Key
button will change the LFO speed in
dependency of the incoming pitch. Higher notes will
produce higher LFO speeds.
LED off – no key follow
LED slightly lit – 50% key follow
LED fully lit– 100% key follow
Summary of Contents for DOMINION 1
Page 1: ...Operating Manual...
