manualshive.com logo in svg

MF DIGITAL DIRECTOR PRO series, Operator'S Manual, Page: 63 / 79

Share
Download
MF DIGITAL DIRECTOR PRO series Operator'S Manual Download Page 63

 

 

DIRECTOR  Series Operator’s Guide 

 

Document Revision: 06/15/05 

 

 

Page 62

 

discs,  copying  discs,  unloading  discs,  etc.),  and  the  estimated  time  of 
completion (E.T.C). 
 
The  lower  pane  is  the  COMPLETED  JOBS  window  that  lists  all  the  jobs 
completed by the DIRECTOR. Information displayed for each job includes: 
its assigned JobID, the total number of requested DVD  or CDs, the number 
of  successful  DVD  or  CDs  produced,  the  number  of  failed  DVD  or  CDs 
produced and the time each of the jobs was completed. 
 
 

The Production Process 

During  production  the  blank  discs  will  be  loaded  one  at  a  time  from  the 
input spindle into the recorders and/or printer. Upon successful completion 
the  discs  will  be  unloaded  onto  the  output  spindle.  This  process  will 
continue until the job is complete, and the DIRECTOR will then advance to 
produce the next job in the queue according to its priority. 
 
However,  if  the  1

st

  input  spindle  empties  before  the  job  is  complete  the 

DIRECTOR will then go to the 2

nd

 input spindle. If the 2

nd

 input spindle is 

empty  the  DIRECTOR  will  go  to  the  third  spindle.    If  the  third  spindle  is 
empty the screen will now display: 
 

 

 

 

 
 
 
 
To  continue  producing  the  job,  place  additional  blank  discs  onto  the  1

st

 

input spindle and click the Yes button. To stop the job click the No button 
and  the  remainder  of  the  job  will  be  aborted.  The  DIRECTOR  will  then 
advance to produce the next job in the queue according to its priority. 

 

 

 

Any  discs  dropped  on  the  reject/centering  spike  have  failed  to  record 
properly  and  should  not  be  used.  Be  sure  to  remove  rejected  discs 
periodically during operation, if the need arises. 

Note: 

Summary of Contents for DIRECTOR PRO series
















































































Reviews:

No comments