Fitting and using the tools
All tools which are fitted within the processor bowl
must be firmly connected to the hexagonal drive shaft
in the center of the processor bowl. Ensure that the
tools are fitted correctly
Metal and plastic blades
1. With the processor bowl already fitted, place the
blade over the hexagonal drive shaft of the
processor, lightly turn the tool until it engages onto
the drive and the blades are close to the bottom of
the bowl and level. (Fig.11)
2. Holding the cover by the feed tube, fit the cover by
rotating clockwise ensure that the safety interlock
has clicked into place. (Fig.12)
Slicing, and grating plates
1. With the processor bowl already fitted, place the
slicing or grating plates into the plate holding disc,
the plates should be placed into the disc as shown
and clicked into place. (will only fit one way) (Fig.13)
2. Place the plate holding disc onto the shaft. ( with
the thinner end at the top) onto the central drive
shaft of the bowl and check that it is firmly fixed in
place. (Fig.14)
HOW TO USE
Fig.1
1
Fig.12
Fig.13
Fig.14
FIG.11
FIG.13
FIG.14
FIG.12
MEZZO food PRO INST copy.indd 7
9/5/07 9:51:20 AM
