Mezger TH 210, Operating Instructions Manual

Page: 2 / 12

Pneumatic table stapler
TH 210
Page: 2
Change: 02/2019
ET 598
Page 2 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx
Contents overview
1 Conformity ...................................................................................................................... 2
2 Safety information ........................................................................................................... 2
3 Warranty and liability ....................................................................................................... 3
4 Intended use ................................................................................................................... 3
5 Ambient conditions/Emission .......................................................................................... 4
6 Operating personnel ....................................................................................................... 4
7 Transport and initial commissioning ................................................................................ 4
8 Fundamental notes on the work technique and handling................................................. 5
9 Decommissioning ............................................................................................................ 5
10 Maintenance and care .................................................................................................... 6
11 Application area/designated use ..................................................................................... 7
12 General/Function ............................................................................................................ 7
13 Reloading/inserting the staples ....................................................................................... 7
14 Setting the stapling device .............................................................................................. 8
15 Error detection ................................................................................................................ 8
15.1 No stapling occurred or the staple wasn't fully bent, or it remains in the stapling
device 9
16 Technical data/versions .................................................................................................. 9
17 Notice of residual risks .................................................................................................. 10
18 Technical Documents/Service ....................................................................................... 11
18.1 List of spare parts ..................................................................................................................... 12
18.2 Pneumatic circuit diagram ........................................................................................................ 12
1
Conformity
This stapling device was built in conformity with the following EU guidelines:
Machinery directive 2006/42/ EG
2
Safety information
Safety instructions and important explanations, are labelled with the following pictograms.
The symbols used in the operating instructions have the following meaning:
Symbol Signal word Meaning
Warning notice
Warning of possible injuries to persons or possible damage to property
Warning of possible defects or destruction of the machine
Prohibition Indicates general prohibitions!
Warning notice Risk of fingers being crushed!
Prohibition Protect from moisture!