Pneumatic table stapler
TH 210
Page:
3
Change:
02/2019
ET
598
Page 3 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx
Read
all
these
instructions
before
using
the
stapling
device
and
keep
the safety instructions in a safe place. Safety on the well.
The operating personnel must be trained in the handling of the stapling device and they must have fully
read and understood the operating instruction.
To avoid injury or damage, the operator must additionally observe the company's internal safety
guidelines!
In addition, we would like to refer to further national rules and safety provisions which are not contained
in this manual.
Keep persons who are not instructed, especially children, away from your work
area!
If the operator discovers damage to the stapling device during production, the stapling device may no
longer be used and must be repaired by a specialist!
The required personal protective equipment must be provided by the operator.
Only original parts may be used as spare parts!
3
Warranty and liability
Our “General Terms of Sale and Delivery” shall generally apply”
These terms were made available
to the operator by the time of contract award at the latest.
Any warranty and liability claims in the case of personal and material damage shall be excluded,
if such damage occurred as a result of:
-
Improper use of the tool (not in compliance with intended use).
-
Non-compliance with the specification provided in the operating instructions as regards
transport, storage, assembly, commissioning, operation, maintenance and setup of the
equipment.
-
Operation of the tool with defective safety equipment or improperly installed or non-functional
safety and protection facilities.
-
Improper monitoring of tool parts which are subject to wear and improperly executed repair
work.
-
Any type of manipulation of the tool.
4
Intended use
The stapling device is
only
to be used as intended. It may only be used, operated and maintained
according to the information contained in this operating manual.
Only use the materials and staples defined for the respective stapling device, otherwise
malfunctions and damage to the stapler may occur. The stapling device may only be used as
specifically described in this operating manual. Any other application is only permitted after a
prior written approval from the manufacturer.
Any other usage is not regarded as intended use and can lead to damage to persons or property. The
operator of the machine is solely liable for damages deriving from any non-intended use.
The operator must ensure that the stapling device is only operated as intended and that all types of
hazards to life and health for the user or third parties are avoided. In addition, a compliance with the
accident prevention regulations and other safety regulations and laws must be observed.
If the stapling device is abused for purposes other than the specified usage
scenarios, this can lead to accidents
