Meyra 2.360, Maintenance And Service Manual

Page: 32 / 40

32
Vario block
☞
Note:
After any change to the vario block the clothes guard
needs to be adjusted to the circumference of the drive
wheel.
– Therefore observe chapter
Clothes guard on page 13.
Axle position/balance point
By repositioning the vario block (1) the axle position as well
as the balance point can be changed.
!
Attention:
If the Vario block is moved forward [2], there is a higher
risk of overturning backwards, especially when negoti-
ating obstacles and on hills. – Danger of accident!
Repositioning the vario block
1. To reposition the vario block (1) disassemble the two
screws (3).
2. Afterwards remount the screws (3).
2
1
3
3