Meyra 2.360, Maintenance And Service Manual

Page: 13 / 40

13
ARM SUPPORT
Clothes guard
The clothing guard [1] running parallel to the circumference
of the wheel has to be adjusted to the selected wheel po-
sition and size.
!
Attention:
The distance between the driving wheel and the
clothes guard should be as small as possible, approx.
1 cm. – Danger of jamming!
Adapting the clothes guard
After loosening the two screws (2)+(3) the clothes guard
can be slightly adjusted.
☞
Before changing the axle position of the drive wheel
in horizontal or vertical direction, remove the clothes
guard!
1. For this disassemble the screws (2)+(3).
2. Reposition the clothes guard.
3. Afterwards remount the screws (2)+(3).
1
2
3