background image

1

2

1

   19

Positioning the operating module

Switch off the operating module before 
adjusting/removing it.

Function description

You will find a detailed description of the 
operating elements and symbols in the op-
erating manual for < 

Operating module

 >.

The position of the operating module can 
be adjusted to suit the individual size of the 
user. The operating module can also be 
removed for transportation or storage and 
can be laid on the seat or stored separately.

Adjusting the distance to the padded 

arm support

Switch off the operating module before 
adjusting/removing it.
The maximum extension reached, when 
a mark becomes visible in the receptacle 
tube of the operating module.

Slacken the clamping screw distance ad-
justment (1). Afterwards slide the operating 
module into the desired position. In doing 
so carefully guide the cable and retighten 
the clamping screw (1) securely.

Removing the operating module

In order to remove the operating module 
loosen the clamping screw (1) and discon-
nect the plugged connection (2).

 

Do not pull on the cable while do-
ing so.

Afterwards pull out the operating module 
toward the front out of the arm support 
tube. 

Summary of Contents for 1.650 iCHAIR MEYLIFE





































































Reviews: