Meyra 1.254, Operating Manual

Page: 37 / 52

37
SERVICE
Cleaning and maintenance
Do not clean the Scooter with a high-pres-
sure cleaner! – Danger of short circuit!
Silicone free water based cleaning agents
and care products should be used for the
care of the vehicle.
☞
In doing so the manufacturers in-
structions are to be observed.
Do not use aggressive cleaning agents e.g.
solvents, or hard brushes etc.
Upholstery and covers
☞
Clean the upholstery with warm water
and hand washing liquid.
☞
Remove spots with a sponge or a soft
brush.
– Wash off persistent dirt with com-
mercial fine detergent.
☞
Do not soak! Do not machine wash!
Follow-up with clean water and allow to dry.
Plastic parts
The plastic panelling is attacked through
non-ionic tensides as well as solvents and
especially alcohol.
The plastic panels and parts are made of
high-quality plastic.
Only clean the plastic parts with warm wa-
ter and neutral detergent or soft soap.
When using commercial plastic cleansers
the manufacturers application instructions
are to be observed.
Finish
The high quality finish ensures an optimum
of protection against corrosion.
Should the coating be damaged with
scratches or similar, these areas can be
touched up with our paint pen available at
the specialist dealer.
Slight lubrication of moving parts will en-
sure for their long functioning.
Disinfection
If the product is used by more than one per-
son (for example in a care centre), the use of
a commercial disinfectant is mandatory.
Before disinfection the upholstery and op-
erating module are to be cleaned.
A spray- or wiping disinfection is permitted
with tested and accredited disinfectants.
☞
In doing so the manufacturers in-
structions are to be observed.
A list of the disinfectants and disinfection
means tested and approved by the Robert
Koch Institute can be found under:
<
http://www.rki.de >.
During the use of disinfectants it can hap-
pen that surfaces might be affected in such
a fashion that the long term functionality of
parts can be limited.