Meyra 1.254, Operating Manual

Page: 15 / 52

1
2
3
15
DRIVING LOCK
(1) Driving lock
(2) Key position 0 (OFF)
(3) Key position 90° (ON)
DRIVE KEY
Position OFF
The driving key is inserted as far as possible
into the driving key socket (2).
– For switching off turn the driving key
from the position (3) as far as possible
counter clockwise (2).
☞
The Scooter is switched off.
Position ON
The driving key is inserted as far as possible
into the driving key socket (2).
– For switching on turn the driving key
from position (2) clockwise by 90° (3).
☞
The drive mode is enabled.
Locking the Scooter
In order to secure the Scooter against un-
permitted or unwanted use, switch off the
Scooter and pull out the driving key (1).
☞
The selection lever drive/push mode is
in drive mode position.
– For this observe chapter Drive-/push
mode on page 14.