Meyer V-FORCE 7400 Series, Operator And Parts Manual, Page: 31 / 88

PB-74/7500 - 31 -
FRONT SHIELD & SIDE SHAFT DRIVE
KEY PART NO. DESCRIPTION
1 914-3801 1-3/8" Pillow Block Bearing
2 910-0013 80B18 Sprocket 1-3/8” Bore, 5/16” Keyway
3 935-0002 5/16 x 5/16 x 2-1/4” Hardened Key
4 923-3837 SV7500 Front Side Shaft
5 925-3882 Side Shaft Tightener Assy. Complete
6 46-3600-12 Operating Procedure Decal
7 46-3600-14 Maintenance Warning Decal
8 33-0044 Manual Holder W/Cap
9 912-0001 Nylon Roller
10 925-3882-1 Side Shaft Chain Tightener Weldment
11 911-0070 #80-97 Link Roller Chain (540 RPM/1000 RPM Kit)
911-0001 #80-98 Link Roller Chain (Gin Trash-540 RPM/1000 RPM Kit)
911-0035 #80-95 Link Roller Chain (Gin Trash-1000 RPM)
911-0054 #80-94 Link Roller Chain (1000 RPM)
12 808-150-300-10 10 Ga. Machine Bushing (As Required)
13 910-0039 80B22 Sprocket 1-1/2” Bore, 3/8” Keyway (660 RPM Standard On 540 RPM Model Or With
Optional 1000 RPM Kit)
910-0069 80B22 Split Sprocket 1-1/2” Bore, 3/8” Keyway (660 RPM On 540 RPM Model Or With
Optional 1000 RPM Kit)(Weld Seams)
910-0036 80B24 Sprocket 1-1/2” Bore, 3/8” Keyway (718 RPM On Gin Trash 540 RPM Model or Gin
Trash with Optional 1000 RPM Kit)
910-0015 80B18 Sprocket 1-1/2” Bore, 3/8” Keyway (740 RPM On Gin Trash 1000 RPM Model)
910-0078 80B16 Sprocket 1-1/2” Bore, 3/8” Keyway (660 RPM On 1000 RPM Model)
14 808-1.5-2.25-10 10 Ga. Machine Bushing (As Required)
15 813-3118-Z 5/16-16 Nut Zinc
16 808-1-1.5-18 18 Ga. Machine Bushing (As Required)
17 933-3804 5/16-18 x 4” Eye Bolt Fully Threaded
18 808-1.25-1.875-14 1-1/4 ID x 1-7/8 OD x 14 Ga. Machine Bushing
19 929-0003 Tightener Spring
20 38-0013 5/16 x 1-3/4” Roll Pin
21 955-3703 Gas Assist Spring (Prior to 08 serial #'s)
925-5006-1 Shield Support Arm (08 Serial #'s & Later)
22 924-3821 Main Front Shield Assy. (Prior to 08 serial #'s)
924-3827 Main Front Shield Assy. (08 Serial #'s & Later)(540 RPM, 1000 RPM Kit)
924-3827-RPM Main Front Shield Assy. (1000 RPM)
22a 32-0018-1 Heavy Duty Latch
23 924-3826 Left Front Shield
24 924-5001 Right Front Shield Welded Assy.
25 925-3762 Gate Indicator Pointer Assy. (Model 7500 Only)