SEL INSTALLATION AND OPERATING INSTRUCTION MANUAL
WWW.MEYERPRODUCTS.COM
00122-517-01 SEPTEMBER 2009
24
RECOMMENDED REGULAR MAINTENANCE
SERIOUS PERSONAL INJURY CAN RESULT FROM BEING CAUGHT IN A TURNING AUGER, A TURNING
SPINNER, OR OTHER OPERATING TRUCK EQUIPMENT. BEFORE PERFORMING MAINTENANCE
OPERATIONS, PARK VEHICLE ON LEVEL GROUND. SET PARKING BRAKE, SHUT OFF ALL POWER,
AND SHUT OFF TRUCK ENGINE. ALWAYS REPLACE SHIELDS AND COVERS WHEN MAINTENANCE IS
COMPLETE.
frequent greasing during periods of greater use.
weather to prevent material from freezing around auger.
DANGER
or other suitable protection.
each season will greatly prolong spreader life. To open bottom door and top cover,
disconnect
electrical
safety interlock and pivot around to end of spreader.
1
. Clean
electricalÊplugs
before taking apart or connecting.
2
. Protect
electricalÊplugs
while in use and after taking apart with
dustÊcaps
3
. Auger bearing requires periodic greasing every 15 hours of use and more
4
. Greasing spinner hinge rod at support pivot points is suggested.
5
. Hosing down and cleaning spreader after each use, and repainting or oiling after
6
. Spreader trough should be completely emptied after each use during severe cold
PAGE 19
