Meyer Sound Stella - 4 Constellation Operating Instructions Manual Download Page 3

iii

SYMBOLS USED

These symbols indicate important safety or operating features in this booklet and on the chassis:

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this loudspeaker near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accor-

dance with Meyer Sound's installation instructions.

8. Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus that produce 
heat.

9. Do not defeat the safety purpose of the grounding-type 

plug. A grounding type plug has two blades and a third 
grounding prong. The third prong is provided for your 
safety. If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete 
outlet.

10. Protect the power cord from being walked on or pinched, 

particularly at plugs, convenience receptacles, and the 
point where they exit from the loudspeaker or power 
supply. The AC mains plug or appliance coupler shall 
remain readily accessible for operation.

11. Only use attachments/accessories specified by Meyer 

Sound.

12. Use only with the caster rails or rigging specified by 

Meyer Sound, or sold with the loudspeaker. Handles are 
for carrying only.

13. Unplug this loudspeaker during lightning storms or when 

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servic-

ing is required when the loudspeaker has been damaged 
in any way, such as when the power-supply cord or plug 
has been damaged; liquid has been spilled or objects 
have fallen into the loudspeaker; rain or moisture has 
entered the loudspeaker; the loudspeaker has been 
dropped; or when for undetermined reasons the loud-
speaker does not operate normally.

CAUTION: 

To reduce the risk of electric shock, 

do not expose this loudspeaker to rain or mois-

ture. Do not install the loudspeaker in wet or humid 
locations without using weather protection equip-
ment from Meyer Sound.

Dangerous voltages: risk of elec-

tric shock

Important operating instructions

Frame or chassis

Protective earth ground

Pour indiquer les risques résult-

ant de tensions dangereuses

Pour indequer important instruc-

tions

Masse, châssis

Terre de protection

Zu die gefahren von gefährliche 

spanning zeigen

Zu wichtige betriebs-anweisung 

und unter-haltsanweisung zeigen

Rahmen oder chassis

Die schutzerde

Para indicar voltajes peligrosos

Instrucciones importantes de fun-

cionamiento y/o manteniento

Armadura o chassis

Tierra proteccionista

!

!

Summary of Contents for Stella - 4 Constellation

























Reviews: