Meyer Sound Stella - 4 Constellation, Operating Instructions Manual

Page: 14 / 24

CHAPTER 2: CONNECTING THE STELLA-4
14
To connect two Stella-4s to a single Stella-188 Channel
Output, daisy-chain the cable of the first Stella-4 to the
second Stella-4. Wire the cable connector plugged into
the first Stella-4 with both the cable connected to the
Stella-188 and the cable connected to the second
Stella-4.
NOTE: When connecting two Stella-4s to a
single Stella-188 Channel Output, the maxi-
mum cable length is reduced by half. For maximum
Stella-4 cable lengths, refer to Table 3 on page 13
and Table 4 on page 13.
5. Enable output from the audio sources (from a mixer or
processor) connected to the Stella-188.
6. Power on the Stella-188 and monitor the LEDs on the
front panel to verify connections.