Meyer Sound Stella - 4 Constellation, Operating Instructions Manual

Page: 17 / 24

STELLA-4 OPERATING INSTRUCTIONS
17
4. Attach the pivot plate assembly to the wall plate using
the screw and washers previously removed. Tighten the
screw.
5. To adjust the position of the Stella-4, loosen the four
pivot plate screws and position the Stella-4 as neces-
sary. Tighten the pivot plate screws to secure the
Stella-4.
MOUNTING THE STELLA-4C
The Stella-4C can be mounted flush in ceilings and walls
with any standard 8-inch backcan (such as the Atlas
BMT95-8 and Lowell CP-84 and XCP-84) with a minimum
depth of 4 inches.
Installing the Stella-4C in a Backcan
To install the Stella-4C into a standard 8-inch backcan:
1. Mount the backcan in the ceiling or wall according the
manufacturer's instructions.
2. Place the Stella-4C in the backcan and secure it with the
8-32 screws included with the Stella-4C.
3. Attach the Stella-4C grille frame:
■ Screw the three threaded studs (included with the
Stella-4C) into the Stella-4C grille frame.
■ Attach the grille frame to the Stella-4C by inserting the
other ends of threaded studs into the three nylon latches
in the Stella-4C.
■ Gently push the grille frame in until it locks in place flush
with the wall or ceiling.
NOTE: The Stella-4’s grille frame is held in
place with the loudspeaker’s three nylon
latches. To remove the grille frame, gently pull it,
evenly, until it is releases from the latches.
Backcan
Stella-4C
grille frame
Stella-4C