3. In the box directly above the output channel number, it is labeled "Output". Click on the Up
arrow next to the box to change the output type to "PFL M".
4. In the Configuration menu, select Send Configuration to Frames. The output channel has
now been re-configured as a mono PFL channel.
5. Open the Inputs window. In the top left corner of the window, click the button labeled "Unlock
+48v". This will allow you to turn on phantom power for each microphone input channel.
6. Click on the L button beside each fader to listen to the signal from each microphone.
Carefully document any anomaly in microphone signal, such as hums or buzzes, so that it may
be addressed in advance of the tuning phase.
30
CHAPTER 7: INITIAL SYSTEM TESTS
