MEV™ Daytona™ OWNERS MANUAL
13
Pre-‐operation Checklist:
Every MEV cart has been thoroughly inspected by both the manufacturer and dealer prior to
delivery.
Before the initial operation, it is important that the user inspect the cart using the following
guidelines;
The following items should be checked on a daily basis prior to cart operation:
•
General -‐ check that all parts are securely fastened to the cart, no parts are missing, and all
screws or nuts are properly tightened.
•
Review -‐ all warning decals and placement on the cart.
•
Tires/Tyres – check for proper inflation, visually check for damage and wear on a daily basis.
The correct pressure is 30 psi / 2.75 bar.
•
Batteries – Fill electrolyte level in all cells of each battery. Add distilled water as described in
the Battery Care section of this manual. All wires should be free from corrosion. Batteries
should be fully charged before first use of cart.
•
Brakes – check
•
Charger -‐ Charger cord, plug, and receptacle inspect for cracks, loose connections, or frays.
•
Forward/Reverse Switch – ensure proper operation
•
Brakes – make sure the brake pedal is operating smoothly. The cart should come to a smooth
stop when operating. If excessive or low pedal pressure, pulling to one side or unusual noise
is noticed while braking, have the cart serviced immediately.
•
Parking Brake – make sure the foot operated parking brake is functioning properly.
•
The parking brake should engage the rear wheels when in the up position and allow the cart
to roll smoothly when in the released position.
•
Reverse Buzzer – the reverse buzzer should sound when the key is in the on position and the
direction stick is set to reverse ‘R’.
•
Steering – steering should be smooth and consistent.
•
General – listen for any unusual noises such as squeaks or rattles. Check the cart’s ride and
performance. Have a certified technician investigate anything unusual.
