31
Problem-solving guide
The video has the time or - -.- - on the display
If while you are setting up the video, the timer or - -.- - is in the display, the video is switched off or
has already gone through the autoset procedure (OK has already been pressed). In this case, please
turn to page 6 and carry out step 2 until you see the manual tuning screen.
The video has lost programmed channels
If the video has lost the programmed channels, check whether the video has been switched off. If
the video is left with no power for up to eight hours, you can press the
MENU
button when the
autoset screen appears to bring back the original settings. See page 9 for how to set time and date.
The timer light stays on the display, even though the recording has finished
If the timer light stays on even though the recording has finished, this is because VPS/PDC takes
into account a delay in recording for up to 24 hours.
The video has a number other than 52 when RF appears
A number other than 52 might be displayed on the video when RF is flashing in the display. This
means that the number has been adjusted in the past.
The TV needs to be tuned in to get the blue auto set or auto search screen. (Refer
to page 6)
METZ_GB(T50)
2005.6.21
3:55
PM
˘
`
31
