81
With the menu item, "General settings", you can
specify whether or not the data are to be saved in
the non-volatile memory of the TV set when trans-
mission parameters are changed.
This update function applies to stations which use
different transmission parameters at different times
of the day, such as when they transmit regional
programmes.
Setting the data update function
• Press the MENU key to open the TV menu.
• Press the red key
to open
the menu "Configuration".
• Press the appropriate nume-
ric key (in this example
to
select "DVB-S".
• The cursor is located on the
line "LNB supply voltage".
• Press the appropriate nume-
ric key (in this example
to
select "General settings".
• In the setting window, use
the
- +
key to set "Update
data" to "On".
• Press the OK key to confirm the new setting.
• Press the EXIT key to close the TV menu.
Calling the menu
22.5 Setting the stations
Updating the data
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
MENU
OK
EXIT
Update data on
General settings
Manual search
Automatic search
Search settings
Satellit B
Astra 19,2°
DiSEqc system
LNB supply voltage
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
Configuration
Change with
Accept value with .
– +
OK
Section 22.5 only in the case of corresponding equipment or conversion.
☞
607 47 2026.A1 607 FHDTV-GB 10.10.2007 17:38 Uhr Seite 81