METRON MP430 Series, Manual

Page: 20 / 33

Page 12 of 25
The [SYSTEM STATUS], [SYSTEM LOGS], and [CONFIG] buttons navigate the user to the top screen of a column of similarly
grouped screens or menus.
SYSTEM STATUS: The [SYSTEM STATUS] button can be pressed at any time to return the screen to the home System Status
screen #1. System Status screens display the real time information variables about the pump system.
SYSTEM LOGS: The [SYSTEM LOGS] button displays the System Logs menu. Once the menu is displayed, buttons with
numbers on them can be used to enter the selected data log. See the following page for details on navigating the System
Logs.
CONFIGURATION: The [CONFIG] button displays the Config menu which groups the different types of set points that
configure the system to operate in the desired manner. Use the [UP] and [DOWN] buttons to scroll between the two menu
screens. Buttons with numbers on them can be used to enter the selected configuration screen group. See the System
Setpoint Definitions section for descriptions on the functionality of each set point.
1 SYSTEM STATUS B1
PRES STRT AB 460V
110 100 BC 461V
psi psi AC 460V
SYSTEM LOGS
1) Alarm Log
2) Event Log
3) Pressure Log
1 CONFIG
1) SYSTEM SETPOINTS
2) USER PREFERENCES
3) TECH SCREENS
2 SYSTEM STATUS
Phase A 125 Amps
Phase B 124 Amps
Phase C 125 Amps # 1 ALARM LOG
Pump Failed To
Start Alarm Occurred
20/16/04 07:32:15 2 CONFIG
1) ANALOG SIGNALS
2) AUXILLIARY ALARMS
3) COMM PORTS
3 SYSTEM STATUS
Pump Countdown Tmr
0sec Until Start
0min Until Stop # 1 EVENT LOG
System in Off
Mode Occurred
10/16/04 13:15:15 101 SYSTEM SETPOINTS
Pump Start
Pressure
[100.0]psi 0-999.9
4 SYSTEM STATUS
Pump Run Hrs: 5.3
# Of Starts: 8
Mon 10/17/04 17:53:26 PRESSURE LOG
10/16/04 17:52:45
112 psi
Skip Rate:[EACH ] 201 USER PREFERENCES
Set System Real
Time Clock
[17:03:52]
5 SYSTEM STATUS
Controller Power
On Time 18.5 Hrs
10/15/04 17:53:26 See the following page for an example of
scrolling through the Alarm, Event, and
Pressure Logs 301 TECH SCREENS
Controller Model
Number
[MP300]
6 SYSTEM STATUS
Firmware Ver SV 1.1
Commissioned Date:
11/15/02
401 ANALOG SIGNALS
Analog Input 01
Slope:
[0.21346771]
501 AUX USER PROGRAMS
AUX# 1
Enabled
[Yes]