Metrologic TECH 7 MS770, Installation And User Manual

Page: 5 / 32

Introduction
Metrologic's TECH 7
®
laser bar code projection scanner is encased in
an NEMA-12 steel case. The case construction enables the scanner
to operate in harsh surroundings, especially industrial environments.
Water-resistant, shock-resistant, and rugged, the TECH 7 is also fast,
aggressive and reliable. It can register bar codes at a range of
76mm - 254mm (3" - 10") and can autodiscriminate among all
common codes.
To suit particular applications, two different scan patterns are
available: an omnidirectional pattern of 20 interlocking lines (Model
MS770); or a 12-line raster pattern (Model MS775). The scanner has
a VLD design, a scan speed of up to 2000 lines per second, and uses
less than 8 watts of power.
Other features include an Application Specific Integrated Circuit
(ASIC) and MECCA
©
(Metrologic Enhanced Code Correcting
Algorithm). An Application Specific Integrated Circuit (ASIC) is in the
decoding system and virtually eliminates misreads. MECCA
©
(Metrologic Enhanced Code Correcting Algorithm) enables the TECH
7 scanner to read poorly printed, wrinkled or even torn bar codes on
the first pass.
Unpacking List
The shipping carton, should contain the following:
z Installation and User's Guide (MLPN: 2159)
z ScanSelect™ Scanner Programming Guide (MLPN: 2186)
z TECH 7 Model MS770 with omnidirectional scan pattern or
TECH 7 Model MS775 with raster scan pattern
z Communication Cable with Power Supply (optional) or
Communication Cable (optional)
z Back Plate (optional) or Stand (optional)
If any item is missing or to order additional items, contact the dealer,
distributor or call Metrologic's Customer Service Department at
1-800-ID-METRO or 1-800-436-3876.
1