￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
Operation and control
￭￭￭￭￭￭￭￭
39
7.5
Configuration
Open Settings
1
Click on
to go to the settings section.
Speaker
Enable or disable the internal speaker. This will activate an acoustic signal
when the barcode reader is used.
Calibrate Instrument
Calibrate the instrument
(see "Calibration", page 38)
.
System Suitability Test
Conduct a system suitability test
(see "System suitability test (SST)", page
38)
.
Shutdown Delay
NOTICE
The shutdown delay will only affect battery-powered instruments.
For an instrument connected with a power supply, the shutdown
delay is disabled.
By default, no shutdown delay is configured.
Define a shutdown time to conserve battery charge.
For example if you enter value "3": A battery-powered instrument will
automatically shutdown after 3 minutes not in use.
Battery Chemistry
There are many different types of AA batteries. For an accurate battery life
indicator, it is important to choose the battery chemistry that is being used
in the device. The two chemistries that are supported are Li and NiMH.
Set the battery chemistry:
1
In the Settings section, click on
[Battery Chemistry]
.
2
Select the battery type:
Summary of Contents for Mira P
Page 1: ...Mira P Product Manual 8 0924 8001EN 2019 03 29...
Page 2: ......
