manualshive.com logo in svg

Metrohm Dialysis 6.5330.100, Instruction Manual

Share
Download
Metrohm Dialysis 6.5330.100 Instruction Manual Download Page 21

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

3 Installation

IC equipment Dialysis 6.5330.100

￭￭￭￭￭￭￭￭

15

￭

Tighten another PTFE capillary, 0.5 mm ID / 1 m (6.1803.040), to
the outlet of the second pump tubing with black stoppers
(6.1826.340) using a pressure screw (6.2744.070).
Tighten the other end of the PTFE capillary to the waste container.

 

5 Connecting the inlet of the acceptor solution

￭

Tighten a PTFE capillary (6.1803.040) to the inlet of the pump
tubing with orange/yellow stoppers (6.1826.320) using a pressure
screw (6.2744.070).
Immerse the other end of the PTFE capillary in the vessel contain-
ing the acceptor solution (6.1808.070 with 6.1602.150) and fas-
ten with a PVDF pressure screw (6.2744.000).

￭

Tighten another PTFE capillary (6.1803.040) to the outlet of the
pump tubing with orange/yellow stoppers using a pressure screw
(6.2744.070).
Tighten the other end of the PTFE capillary to the acceptor inlet of
the dialysis cell 

(3-

5

)

 using a pressure screw (6.2744.000).

 

6 Connecting the outlet of the acceptor solution

Summary of Contents for Dialysis 6.5330.100


































Reviews:

No comments

Brands by name

Popular brands

Load more brands