￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
IC equipment Dialysis 6.5330.100
￭￭￭￭￭￭￭￭
13
￭
PEEK capillary, 0.5 mm ID / 70 cm (6.1831.160)
￭
Pressure screw PVDF (6.2744.000)
￭
Coupling olive/UNF 10/32 (6.2744.030)
￭
Pressure screw, short (6.2744.070)
￭
Pump tubing connection with locking nut (6.2744.160)
We recommend using the peristaltic pump in the ion chromatograph for
conveying the acceptor solution.
The acceptor solution is pumped with two pump tubings with yellow/
orange stoppers (6.1826.320). Additional information on the tubing con-
figuration of the peristaltic pump can be found in the
chapter "Installing
the peristaltic pump" in the manual for your ion chromatograph
.
1 Preparing two pump tubings for the sample
Use the two pump tubings with black stoppers (6.1826.340) for con-
veying the sample. Proceed as follows for each tubing:
￭
Attach the coupling olive/UNF 10/32 (6.2744.034) to the inlet.
￭
Attach the pump tubing connection with locking nut
(6.2744.160) to the outlet
(see chapter "Installing the peristaltic
pump" in the manual for the ion chromatograph or in the man-
ual for the Sample Processor)
.
2 Preparing two pump tubings for the acceptor solution
Use the two pump tubings with orange/yellow stoppers (6.1826.320)
for conveying the acceptor solution. Proceed as follows for each tub-
ing:
￭
Attach the coupling olive/UNF 10/32 (6.2744.034) to the inlet.
￭
Attach the pump tubing connection with locking nut
(6.2744.160) to the outlet
(see chapter "Installing the peristaltic
pump" in the manual for the ion chromatograph or in the man-
ual for the Sample Processor)
.
Summary of Contents for Dialysis 6.5330.100
Page 2: ......