Insert a new module for the Multi Autolab Cabinet
which is not recommended
. Programming of the M101 or M204 module is done
through the Edit Serial Number application.
5.1
– The Edit Serial Number application
The Edit Serial Number application can be downloaded from the Metrohm Autolab
website
. This application needs to be installed on the host computer. During installation,
a shortcut is created in the Start menu (All programs – Autolab – Tools – Edit serial number).
When the application is started it will connect to all available Autolab instruments
connected to the host computer.
When all instruments are connected, the Edit Serial Number application will display a list of
available devices, identified by serial number (see Figure 25).
2
Unprogrammed M101 or M204 modules will work according to specifications, however it will not be
possible to identify these modules based on their positions in the Multi Autolab Cabinet.
3
autolab.com/export/Homepages/Autolab/download/Servicedocs/Edit_Serial_Number.zip
Note
It is always possible to reprogram M101 or M204 modules using the Edit Serial Number
application.
Note
Make sure you are using the latest version of the Edit Serial Number application. Also
make sure that you are using the latest version of the Autolab device driver.
Note
Before starting the Edit Serial Number application, connect the Multi Autolab Cabinet to
the computer using the main USB connector on the back panel. When prompted, install
the USB drivers as indicated in the NOVA Getting Started manual.
Note
While the software connects to the available instruments, no user interaction is possible.
This idle time increases with the number of instruments.
20 |
P a g e
