2.3
Connection to the PC
2.3
Connection to the PC
2.3.1 Connecting
cable
Always switch off 830 IC Interface and PC before you connect the two
instruments with the 6.2134.100 Cable
Connect the PC connection
at the 830 IC Interface to one of the serial
COM ports at the PC using the 6.2134.100 Cable (9 pin/9 pin). If only a
25-pin COM interface is available on the PC then the 6.2125.110
Adapter cable or a commercially available adapter must be used.
830
6.2134.100
Fig. 4:
Connection of 830 IC Interface to PC
2.3.2 Software
installation
The PC program
«IC Net 2.3»
is required for the operation of the 830 IC
Interface; this is contained on the 6.6034.033 CD included in the acces-
sories. This program runs under Windows 2000 and Windows XP oper-
ating systems and is installed according to
section 1.4.2
of the
«
IC Net
»
Instructions for Use
.
830 IC Interface / 8.830.1003 Instructions for Use
9
Summary of Contents for 830
Page 2: ......
