background image

5.1 Basic software operation

■■■■■■■■■■■■■■■■■■■■■■

26

■■■■■■■■

 

4

Click on   or 

Menu bar 

 Devices 

 Start

.

 

5

Adapt the information in the dialog window 

Determination infor-

mation

 if necessary. When all details are correct click on 

[OK]

.

 

6

When the addition of standard solution is required a message will be
displayed in the subwindow 

Messages

. Add the specified volume of

standard solution(s) through one of the two pipetting openings in
the transparent ring 

(3-

5

)

 and confirm the addition by clicking into

the subwindow 

Messages

.

The subwindow 

Run

 will show the progress of the determination.

The subwindow 

Live curve

 will display the currently measured

voltammogram.

The subwindow 

Curves

 will display an overlay of already mea-

sured voltammograms on the tab 

Curves

. On the tab 

'Sub-

stance name' calibration

 the corresponding calibration curve

can be found.

The subwindow 

Results

 will display the results of all substances

specified in the method on the tab 

Results

. Evaluation details,

like peak heights and peak positions, can be found in the same
subwindow on the tab(s) 

'Substance name'

.

At the end the determination file and, if defined in the method, also
a PDF file with the report will automatically be saved.

NOTICE

Directories for automatic saving of determinations and reports are
predefined and cannot be modified.

Determination files are saved in the directory 

%USERPROFILE%

\Documents\Metrohm\Portable VA Analyzer\Determina-
tion

 . The file name is automatically generated from date and time

of the determination start and the sample identifier and has the
format 

YYYYMMDD-hhmmss 'Sample identifier'.det

.

The PDF file with the report is saved in the directory 

%USERPRO-

FILE%\Documents\Metrohm\Portable VA Analyzer\Report

with the file name 

YYYYMMDD-hhmmss 'Sample identi-

fier'.det_Report.pdf

.

Summary of Contents for 2.946.0010


















































































Reviews: