Metrohm 2.946.0010, Manual

Page: 29 / 81

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
￭￭￭￭￭￭￭￭
21
NOTICE
The battery performance will deteriorate over time. If the operating
times with a fully charged battery are much shorter than usual, take the
instrument to a Metrohm Service to have the battery replaced.
CAUTION
For charging only use the supplied USB power supply unit
(6.02117.000), which has been approved as accessory for use with this
instrument.
CAUTION
The battery can only be replaced by an authorized Metrohm Service.
Any attempt of unauthorized replacement will result in a loss of war-
ranty.
4.3.1 Charging the battery with power supply unit
The USB power supply unit is delivered with different electrical plug adap-
tors (available plug types EU / UK / US / AU). Attach the suitable adapter.
1 Connect the USB type A plug of the USB cable (6.02108.000) to the
USB connection socket of the power supply unit (6.02117.000).
2 Connect the USB type B mini plug of the USB cable (6.02108.000) to
the USB connection socket
(2-
4
) on the rear side of the potentiostat.
3 Connect the power supply unit to the power socket.
4.3.2 Charging the battery via USB connector (PC)
1 Connect the USB type A plug of the USB cable (6.02108.000) to the
USB connection socket of the PC.
2 Connect the USB type B mini plug of the USB cable (6.02108.000) to
the USB connection socket
(2- 4 ) on the rear side of the potentiostat.