￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
942 Extension Module Vario ChS-PP (2.942.0300)
￭￭￭￭￭￭￭￭
11
1
2
3
Figure 4
Removing the base tray
1
Tilt the instrument sideways and lay it down flat.
2
Loosen the 4 cylinder screws with the 3 mm hex key. Remove the cyl-
inder screws and their washers.
3
Remove the base tray.
Always mount the base tray under the lowermost instrument of the stack.
Mounting the base tray
Prerequisites
￭
The instrument is switched off.
￭
The bottle holder is cleared.
￭
All of the cable connections on the rear have been disconnected.
￭
There are no loose parts in the instrument.
￭
The instrument is lying on its side, and the bottom surface is visible.
Accessories
￭
3 mm hex key (6.2621.100)