3.4 Connecting the data cable
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10
￭￭￭￭￭￭￭￭
Connecting the power cord
Accessories
Power cord with the following specifications:
￭
Length: max. 2 m
￭
Number of cores: 3, with protective conductor
￭
Instrument plug: IEC 60320 type C13
￭
Conductor cross-section 3x min. 0.75 mm
2
/ 18 AWG
￭
Power plug:
– according to customer requirement (6.2122.XX0)
– min. 10 A
NOTICE
Do not use a not permitted power cord!
1 Plugging in the power cord
￭
Plug the power cord into the instrument's power socket.
￭
Connect the power cord to the power grid.
3.4
Connecting the data cable
In order to control the DS2500 Liquid Analyzer, connect it to a computer
either directly or via a local network (LAN).
For direct connection to the network card of a computer, use the supplied
data cable.
Additional steps might be required for connecting via your local network.
As network configurations vary considerably across different companies,
exact details are not provided in this manual. Have your network specialist
establish the connection between the instrument and the company net-
work.
Connecting the computer directly
Accessories
￭
DS2500 data cable
￭
Computer with installed control software
1
Remove the protective cap from the LAN connection socket
.
2
Plug the cable into the LAN connection socket
and tighten it.
