10
10. . Results, Curves, Recalculation
Results, Curves, Recalculation
726 Titroprocessor, Short Introduction
39
39
The determination file names are accompanied by the file attributes, which
show, how the results of this determination were obtained.
The first character of the file attribute stands for the calculation procedure.
The second character stands for the method that was used for producing
the raw data of the determination.
Attribute
Calculation
Method
o
= original
unmodified
unmodified
n
= new
new, unsaved
m
= modified
recalculated
loaded and modified
If you want one individual result not to be included in the statistics calcula-
tion, select it with the cursor keys and press the [Un/Mark] softkey. These
results will be labeled by an exclamation mark (!). The recalculation of the
statistics results will occur immediately.
10.3 Single Curves
Titration curves can be viewed by pressing the [Show curves] softkey on the
main page.
The representation of the curve may be modified in the same way as on the
result pages. All modifications are local and volatile, i.e. modifications on the
‘Curves’ page will not change the current method.
The following softkeys act like those on the result pages
[* Params] [* Formula] [* Report] [Common vars] [Calib. Data]
[Sample data]
If more than one curve has been produced in a determination, you can se-
lect one of them by pressing the [Record] softkey and choosing a curve
from the appearing picklist.
Press [Select curve] to view curves of other determinations. You can then
choose a determination from the list of the determinations currently present
in the working memory. Furthermore you can select an individual curve if
there are more than one per determination.
