manualshive.com logo in svg

METRObility Optical Systems CenturyStack 8100, Management Manual

Share
Download
METRObility Optical Systems CenturyStack 8100 Management Manual Download Page 58

58

CenturyStack 8100 Managed Hub

Event Group Configuration Menu-3

The Counter Ids, as shown below, are explained as follows:

EtherStats DropEvents: The number of times drop events have
been detected due to lack of resources.

EtherStats Octets: The total number of octets of data
(including those in bad packets) received on the network
(excluding framing bits, but including FCS octets).

EtherStats Pkts: The total number of packets (including bad
packets, broadcast packets, and multicast packets) received.

EtherStats Broadcast Pkts: The total number of good packets
received which were directed to a broadcast address. NOTE:
this does not include multicast packets.

EtherStats Multicast Pkts: The total number of good packets
received which were directed to a multicast address. NOTE: this
number does not include packets directed to the broadcast address.

Summary of Contents for CenturyStack 8100











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands