METRObility Optical Systems CenturyStack 8100 Management Manual Download

Page: 46 / 74

CenturyStack 8100 Managed Hub

Segment Rate Threshold: the number of broadcast packets
received on a given segment per second

Port Rate Threshold: the number of broadcast packets
received on a given port per second.

Optional Module Rate Threshold: the number of broadcast
packets received on each port of a given optional module per
second.

Formula for calculating Broadcast packet rate:

Broadcast packet rate = Broadcast packet received

Sampling Interval in Seconds

To configure the threshold for Broadcast Storm Protection:

1. Select the segment from the Segment ID pop up list.
2. Enter a value in the Segment Rate Threshold field

(or optional module).

3. Enter a Port Rate Threshold.
4. Set the Alarm Action.
5. Set the Alarm Status.
6. Select Save.

Broadcast Storm Protection

Segment ID

10Mbps Segment or 100Mbps Segment

Segment Rate Threshold

Broadcast threshold value for each
segment

Optional Module Rate

Broadcast threshold value for each module

Threshold

Port Rate Threshold

Broadcast threshold value for each port

Alarm Action

Send Trap/Partition/Send Trap and Partition

Alarm Status

Invalid/Enabled/Disabled

Summary of Contents for CenturyStack 8100











































































Search results

Summary of Contents for CenturyStack 8100

Reviews:

Related manuals for CenturyStack 8100

Brands by name

Popular brands

METRObility Optical Systems CenturyStack 8100, Management Manual

Search results

Summary of Contents for CenturyStack 8100

Reviews:

Related manuals for CenturyStack 8100

Brands by name

Popular brands