METRO PROFESSIONAL GSC2350, Instruction Manua

Page: 5 / 197

- 5 -
GB
35. Connect the mains plug to an
easily accessible socket, in
order to quickly disconnect
the appliance from the mains
supply in an emergency. Pull
the mains plug out of the socket
in order to disconnect the
appliance completely. Use the
mains plug as a disconnection
device.
36. The appliance is not intended
to be used with a multi-
socket unit or an extension
cable. The power plug of
the appliance should have
its own independent and
properly grounded socket.
Using adapters may cause
overheating or fire.
37. The appliance must be
properly installed and located
in accordance with these
instructions before it is used.
38. Do not store medical supplies
in the appliance.
39. Do not place the appliance in
direct sunlight or close to any
heat sources, as this will hinder
the cooling process.
40. The refrigerant and insulation
blowing gas used in the
appliance require special
disposal procedures. When
disposing of them, please
consult your service agent or a
similarly qualified person.
41. Do not place heavy objects or
objects filled with water, e.g.
vases, on the appliance.
appliance yourself. In case
of malfunction, repairs are
to be conducted by qualified
personnel only.
26. WARNING! Do not
disassemble or modify
the appliance in any way.
Resulting fire or malfunctions
may lead to injury.
27. Protect the appliance, its
power cord and power plug
against dust, direct sunlight,
dripping and splashing water.
28. Always turn the appliance
off before disconnecting the
power plug.
29. Place the appliance on a
wide, level, dry, clean and
stable surface able to support
the combined weight of the
appliance and its contents.
30. Do not pull the power plug out
of the electrical outlet by the
power cord.
31. If the power cord should
overheat, stop using the
appliance and disconnect the
appliance from the electrical
outlet.
32. The appliance is meant for
commercial and indoor use
only.
33. Dry the appliance and all
accessories before connecting
to the mains supply and
before storage.
34. The appliance is not intended
to be operated by means of
an external timer or separate
remote-control system.