Flo 1700 Series Mobile Computing Workstation Operations Manual, Doc. No. 400210 Rev H
15
InterMetro Industries Corporation
Powering up the Computer Equipment
Powering up the
computer
equipment
You can power up the Mobile Computing Workstation during the initial
charge. The equipment has been designed to operate while mobile or
when plugged into an AC outlet.
Example location of Computer Power Switch
The ON/OFF switch for the computer is located in the front underneath
the writing surface. Depending on your computer configuration, the
switch may be on the left, middle or right side.
Powering up the
monitor
Depress the power switch on the monitor to turn on the monitor. The
monitor can be left on at all times, because a power saving mode shuts
down the monitor when no video signal is present.
Starting Windows and Wireless Network
The computer starts with a Windows operating system preinstalled.
Depending on the configuration, you may have a standard installation
or a custom installation for your location that may require you to enter
Windows authorization codes. All codes along with a Windows
installation CD are shipped with the Mobile Computing Workstation.
For setting-up the wireless LAN and connecting to the hospital network,
consult your IT department.
