Doc#
100576
• REV C
(Sept 2017) Page
16 of 42
3.5.4.4.2 AXIAL POSITION
The MX2034 performs a displacement measurement for axial position and driver the 4-20
mA output proportional to the configured range.
3.5.4.4.3
SHAFT SPEED (RPM) MEASUREMENT
The MX2034 performs a pulse count measurement cause by keyway and drives the 4-20 mA
output proportional to RPM.
3.5.4.5 RANGE
The Range choices are different for Radial Vibration, Axial Position, and Shaft Speed (RPM)
measurements.
3.5.4.6
4-20
mA DIRECTION
The MX2034 allows configuration of upscale or downscale for the 4-20mA output of axial
position measurements only. Upscale means that for the range selected in 3.5.4.5, 4mA
corresponds to bottom of scale and 20mA corresponds to top of scale; downscale reverses
these conventions and means that 20mA corresponds to bottom of scale and 4mA corre-
sponds to top of scale.
3.5.5 CONFIRMING THE CONFIGURATION
After clicking the Send button, you will have the option to abort the configuration change.
Press the
Yes
button to continue.
3.5.6 PRINTING A LABEL
After sending a configuration change, the software will give you the option to print a label.
You can also print a label later from the main screen by clicking Print Labels and then One
Label.
Figure 12: Printing one label