Metrix HX0102, Manual

Page: 35 / 104

Oscilloscope current probe
Chapter II
35
3.3.1. INST MODE (AC AND DC OUTPUT)
Quantity of influence
Range of influence
or condition
Typical value Maximum value
Power supply voltage 9V
dc
±5% ±1mA
dc
±5mA
dc
RMS noise at zero
DC at 2kHz 1.5mA
rms
DC at 60kHz 5mA
rms
Pass band at 14A DC at 60kHz -3dB (see §6)
Rise and fall time 10 to 90% 6µs (see §6)
Delay time 10% 2,3µs (see §6)
Frequency response curves -3dB See §6
Amplitude limitation 60kHz 14A
ac
3.3.2. RMS MODE (DC OUTPUT)
Quantity of influence
Range of influence
or condition
Typical value Maximum value
Power supply voltage 9V
dc
±5% ±20mA
dc
Residual voltage
1
DC ±30mA
dc
Pass band at 20A DC at 60kHz -3dB
Rise time 10 to 90% at 20A 200ms
Fall time 10 to 90% at 20A 600ms
Rise time 10 to 90% at 5A 350ms
Fall time 10 to 90% at 5A 1.800ms
Amplitude limitation 60kHz 20A
ac
1: The time constant of the filter of the RMS converter imposes a delay of one minute for the return of
the signal to zero after a 20A measurement.
With the DC zero performed at ±2mA or ±0.2mV, in INST mode.