Metrix ASYC IV MTX 3292 Remote Programming Manual Download Page 19

Page: 19 / 22

Remote programming

100 000 cts digital multimeter

Commands SYSTem

BEEPer:Status[?]

(Command/Query)

The command

SYST:BEEP:STAT <0|1|OFF|ON>,

activate or de-

activate the beeper of the instrument.
The values are 0 or OFF to de-activate and 1 or ON to activate.
To the question

SYST:BEEP:STAT?

, the instrument returns the

activation status of the beeper.

COMMunicate:SERial

[:RECeive]:BAUD[?]

(Command/Query)

The command

SYST:COMM:SER:BAUD <9600|19200|38400>,

selects the communication speed of the serial link device.

To the question

SYST:COMM:SER:BAUD?

, the instrument returns

the communication speed of the serial link device.

DATE[?]

(Command/Query)

The command

SYST:DATE <year,month,day>,

sets the date.

To the question

SYST:DATE?

, the instrument returns the date.

The parameter <year> is an integer numeric value from 1 to 36.
The parameter <month> is an integer numeric value from 1 to 12.
The parameter <year> is an integer numeric value from 1 to 31.

Summary of Contents for ASYC IV MTX 3292























Search results

Summary of Contents for ASYC IV MTX 3292

Reviews:

Related manuals for ASYC IV MTX 3292

Brands by name

Popular brands

Metrix ASYC IV MTX 3292, Remote Programming Manual

Search results

Summary of Contents for ASYC IV MTX 3292

Reviews:

Related manuals for ASYC IV MTX 3292

Brands by name

Popular brands