Following start-ups
Virtual digital oscilloscopes, 60 MHz
III - 15
Following start-ups (continued)
Programming the WiFi
connection (cont.)
Display of the "factory" settings with in order to completely reprogram the
oscilloscope. The default configuration is an Ad-Hoc non secured connection
with the MTX162 SSID.
This key is only accessible if one of the WiFi settings is changed;
it sends the values entered to the oscilloscope to be memorized.
Only the modified fields are programmed.
Launch of a new WiFi connection with the current settings (last values
memorised by pressing
).
If some settings are changed but not programmed the following message is
displayed:
closes the window.
Starting a WiFi
connection
The WiFi connection starts in several ways:
When powering on:
- if the instrument was using WiFi mode when it was powered off, the
oscilloscope will restart by attempting to establish the previous WiFi
connection.
- if not, if no cables (USB or Ethernet) are connected to the instrument, a
search for a WiFi connection is begun using the current settings.
Cable operation (USB or Ethernet):
- if no WiFi is already operational, from the 'Tools
Activate WiFi…’
menu in the 'Oscilloscope Control’ window.
Then in the WiFi’ window (see above), click on
.
A new WiFi
session opens automatically if the connection is correctly established.
- if a WiFi connection is already established (the 'Tools
Deactivate
WiFi…’ menu is displayed), by closing the application and opening a new
connection from the 'Start of an Oscilloscope' window.
Activates the connection
after having sent the
settings to the
oscilloscope.
Activates the connection without taking
into account the changes to the WiFi
settings.
Return to the previous screen
without any action.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
