Metric Halo 3d Upgrade Board Set Page 113 User Manual Download

Page: 113 / 527

ULN-8 Users Guide

113

• MH EdgeBus programmable and pluggable audio expansion slot.

• Enhanced processing power and massive hardware memory. All 3d hardware includes over a hun-

dred DSP plug-ins and the unique Metric Halo Graph environment within the 3d mixer.

• 128 input x 64 bus (at all sample rates) multi-box unified zero-latency mixer

• 1024 x 1024 internal audio routing matrix (per box)

• Front Panel Metering for Analog Inputs and Outputs on 15 segment multicolor LEDs

• Front Panel signal present, lock and clock selection multicolor LEDs for AES I/O

• 9 detented Front Panel encoders

• Full console metering of every channel and mix bus

• Total recall of every console parameter

• Portable Capabilities – Battery Powerable

• Rack Mount Kit

Options (can be installed before or after purchase)

• Metric Halo Edge Card expansion modules

Click here for more information on the available Edge Card configurations

What you need to use it

• Computer:

• Any Mac that supports Mac OS X 10.8.5 with a Gigabit Ethernet or UAC2 class-compliant USB

connection

• Cat 5e or better cable (e.g. with all 8 conductors)

• Mac OS X 10.8.5 or newer required

• Mac OS X 10.11.5 or newer recommended

• Peripheral Gigabit Ethernet Adaptors supported:

• Apple Thunderbolt Gigabit Ethernet Adapter

• PCIe Gigabit Ethernet Adapter (Intel i210 chipset is known to work)

• Third-party Thunderbolt Gigabit Ethernet Adapter (e.g. as part of a dock)

• USB3 Gigabit Ethernet Adapter

• Software: All CoreAudio compliant software is compatible with Mobile I/O, including:

• Cubase

• Digital Performer

• GarageBand

• iTunes

• Live

• Logic

• Nuendo

Summary of Contents for 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands

Metric Halo 3d Upgrade Board Set, User Manual

Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands