METREL MI 3394 CE MultiTesterXA Instruction Manual Download Page 114

Page: 114 / 157

MI 3394 CE

MultiTester

Auto Sequences

113

Goes to Auto Sequence

view menu.

Starts the selected Auto Sequence

7.1.3

Structure organization of Auto Sequence

group

The Auto Sequences

to be carried out can be selected from the active group in Main Auto

Sequences

menu. This menu can be organized in a structural manner with folders, sub-folders

and Auto Sequences

. Auto Sequence

in the structure can be the original Auto Sequence

a shortcut to the original Auto Sequence

Auto Sequences

marked as shortcuts and the original auto Sequences

are coupled.

Changing of parameters or limits in any of the coupled Auto Sequences

will influence on the

original Auto Sequence

and all its shortcuts.

Figure 7.3: Structure organization of Auto Sequence

group, Auto Sequence

selected

Options

The original Auto Sequence

A shortcut to the original Auto Sequence

Starts the selected Auto Sequence

The instrument immediately starts the Auto Sequence

Enters menu for more detail view of selected Auto Sequence

This option should also be used if the parameters / limits of the
selected Auto Sequence

have to be changed. Refer to chapter

7.2.1

Auto Sequence

view

menu for more information.

Enters Auto Sequence® Configurator menu (if available).

See chapter

7.2.1.3 Auto Sequence

Configurator menu

for details.

Summary of Contents for MI 3394 CE MultiTesterXA






























































































































































METREL MI 3394 CE MultiTesterXA, Instruction Manual, Page: 114 / 157

Search results

Summary of Contents for MI 3394 CE MultiTesterXA

Reviews: