MI 3250 MicroOhm 10A
Main menu
27
4.3.6 Set Limits
With Upper and Lower limits the user is allowed to set limit resistance values. Measured
resistance is compared against those limits. Result is validated only if it is within the given
limits.
Figure 4.14: Setup limits menu
Keys:
Select the parameter to be changed.
Decrees or increase the parameter.
ESC
Returns to the
Settings menu
(changes are stored automatically).
4.3.7 Instrument info
In this menu the following instrument data is shown:
hardware version;
firmware version;
serial number;
calibration date;
Figure 4.15: Instrument info screen
Keys:
ESC
Returns to the
Settings menu
.
